SCARF

Size 40 cm wide x 185 cm long

Material:

Lana Grossa Gomitolo 200 (50% Virgin Wool, 50% Acrylic, Length 700 m / 200 g) 400 g Red Violet / Wine Red / Olive / Mustard / Teal / May Green / Orange (Fb 210); Knitting needles No. 4; Crochet hook No. 3,5.

Kraus re:

Back and forth st. Ajour patterns A and B, M number divisible by 17 + 1 + 2

randm:

After the knitting A and B arb. There are only signs drawn; in the back all M and U li str. Start with the sts in front of the right arrow, always repeat the repeat of 17 sts between the arrows. and end with the M after the left arrow. 11x the 1st – 20th R arb. = 220 R.

Knitting tension:

Ajour pattern A and B with needles No. 4: 22 M and 24 R = 10 x 10 cm.

Note:

To make the same points on both sides of the stop, start both scarf halves at the ends of the scarf.

1st half of the scarf:

Cast on 88 sts with needles no. 4, and knit 3 rows, starting with 1 st at the same time. Then 220 R in ajour pattern A str. Shut down M.

2nd scarf half:

Like the first half of the scarf, but in ajour pattern B str.

Completion:

Tighten the part, moisten slightly and let it dry. Connect the disengaged M in the M stitch. Crochet the longitudinal sound side with 1 R Krebsm (= fe M from left to right) with crochet hook No. 3,5.

SCARF

Size 40 cm wide x 185 cm long

Material:

Lana Grossa Gomitolo 200 (50% Virgin Wool, 50% Acrylic, Length 700 m / 200 g) 400 g Red Violet / Wine Red / Olive / Mustard / Teal / May Green / Orange (Fb 210); Knitting needles No. 4; Crochet hook No. 3,5.

Kraus re:

Back and forth st. Ajour patterns A and B, M number divisible by 17 + 1 + 2

randm:

After the knitting A and B arb. There are only signs drawn; in the back all M and U li str. Start with the sts in front of the right arrow, always repeat the repeat of 17 sts between the arrows. and end with the M after the left arrow. 11x the 1st – 20th R arb. = 220 R.

Knitting tension:

Ajour pattern A and B with needles No. 4: 22 M and 24 R = 10 x 10 cm.

Note:

To make the same points on both sides of the stop, start both scarf halves at the ends of the scarf.

1st half of the scarf:

Cast on 88 sts with needles no. 4, and knit 3 rows, starting with 1 st at the same time. Then 220 R in ajour pattern A str. Shut down M.

2nd scarf half:

Like the first half of the scarf, but in ajour pattern B str.

Completion:

Tighten the part, moisten slightly and let it dry. Connect the disengaged M in the M stitch. Crochet the longitudinal sound side with 1 R Krebsm (= fe M from left to right) with crochet hook No. 3,5.

SCARF

Size 40 cm wide x 185 cm long

Material:

Lana Grossa Gomitolo 200 (50% Virgin Wool, 50% Acrylic, Length 700 m / 200 g) 400 g Red Violet / Wine Red / Olive / Mustard / Teal / May Green / Orange (Fb 210); Knitting needles No. 4; Crochet hook No. 3,5.

Kraus re:

Back and forth st. Ajour patterns A and B, M number divisible by 17 + 1 + 2

randm:

After the knitting A and B arb. There are only signs drawn; in the back all M and U li str. Start with the sts in front of the right arrow, always repeat the repeat of 17 sts between the arrows. and end with the M after the left arrow. 11x the 1st – 20th R arb. = 220 R.

Knitting tension:

Ajour pattern A and B with needles No. 4: 22 M and 24 R = 10 x 10 cm.

Note:

To make the same points on both sides of the stop, start both scarf halves at the ends of the scarf.

1st half of the scarf:

Cast on 88 sts with needles no. 4, and knit 3 rows, starting with 1 st at the same time. Then 220 R in ajour pattern A str. Shut down M.

2nd scarf half:

Like the first half of the scarf, but in ajour pattern B str.

Completion:

Tighten the part, moisten slightly and let it dry. Connect the disengaged M in the M stitch. Crochet the longitudinal sound side with 1 R Krebsm (= fe M from left to right) with crochet hook No. 3,5.

Stole in a zigzag pattern

approx. 60 x 195 cm (W x L)

Material:
Lana Grossa quality “Silkhair Design” [70% Mohair (Superkid), 30% Silk, LL = approx. 400 m / 50 g]; approx. 50 g turquoise / beige / gold / olive / yellow-green (Fb 1002) and 50 g salmon pink / red-violet / pearl gray / graphite (Fb 1001); Lana Grossa quality “Silkhair Lusso” [78% mohair (superkid), 14% silk, 4% polyamide, 4% polyester, LL = about 210 m / 25 g]; about 50 g of turquoise (Fb 909); Knitting needles No. 6.

Lace pattern:
After knitting arb. The number re outside denotes the Hin-R. In the reverse R all M and U str. In width, after the edge st, continue the sts = 16 sts between the arrows, finish with 2 sts after the 3rd arrow. For a better overview 2 MS are drawn. In height, the 1st and 2nd R continued wdh. The edge-M work with knot edge.

Nodules border:
The 1st M every R as Rechtsstr. dep. The last M each R re str.

Knitting tension:
22 M and 24 R in the hole pattern with Nd. No. 6 = 10 x 10 cm

Manual:
Cast on 131 sts with Silkhair Design Fb 1002. 1 row in stocking sts, then in the hole pattern in succession stripe stocking: * 10 R Silkhair Design Fb 1002, 4 R Silkhair Lusso, from * this 14 R still 10x str. = 154 R ** 10 R Silkhair Design Fb 1001, 4 R Silkhair Lusso, from ** this 14 R still 10x str. = 154 R *** 10 R Silkhair Design Fb 1002, 4 R Silkhair Lusso, from this 14 R still 10x str. = 154 r. Loose on M at Silkhair Lusso.

Note for the color change:
Cross the pattern thread between edge-M and 1st basic-pattern M and weave in until it is needed again after 10 or 4 R, respectively.

Working out:
Sew on the threads, then stretch the stole to the above dimensions, moisten and allow to dry.

Stole in a zigzag pattern

approx. 60 x 195 cm (W x L)

Material:
Lana Grossa quality “Silkhair Design” [70% Mohair (Superkid), 30% Silk, LL = approx. 400 m / 50 g]; approx. 50 g turquoise / beige / gold / olive / yellow-green (Fb 1002) and 50 g salmon pink / red-violet / pearl gray / graphite (Fb 1001); Lana Grossa quality “Silkhair Lusso” [78% mohair (superkid), 14% silk, 4% polyamide, 4% polyester, LL = about 210 m / 25 g]; about 50 g of turquoise (Fb 909); Knitting needles No. 6.

Lace pattern:
After knitting arb. The number re outside denotes the Hin-R. In the reverse R all M and U str. In width, after the edge st, continue the sts = 16 sts between the arrows, finish with 2 sts after the 3rd arrow. For a better overview 2 MS are drawn. In height, the 1st and 2nd R continued wdh. The edge-M work with knot edge.

Nodules border:
The 1st M every R as Rechtsstr. dep. The last M each R re str.

Knitting tension:
22 M and 24 R in the hole pattern with Nd. No. 6 = 10 x 10 cm

Manual:
Cast on 131 sts with Silkhair Design Fb 1002. 1 row in stocking sts, then in the hole pattern in succession stripe stocking: * 10 R Silkhair Design Fb 1002, 4 R Silkhair Lusso, from * this 14 R still 10x str. = 154 R ** 10 R Silkhair Design Fb 1001, 4 R Silkhair Lusso, from ** this 14 R still 10x str. = 154 R *** 10 R Silkhair Design Fb 1002, 4 R Silkhair Lusso, from this 14 R still 10x str. = 154 r. Loose on M at Silkhair Lusso.

Note for the color change:
Cross the pattern thread between edge-M and 1st basic-pattern M and weave in until it is needed again after 10 or 4 R, respectively.

Working out:
Sew on the threads, then stretch the stole to the above dimensions, moisten and allow to dry.

Stole in a zigzag pattern

approx. 60 x 195 cm (W x L)

Material:
Lana Grossa quality “Silkhair Design” [70% Mohair (Superkid), 30% Silk, LL = approx. 400 m / 50 g]; approx. 50 g turquoise / beige / gold / olive / yellow-green (Fb 1002) and 50 g salmon pink / red-violet / pearl gray / graphite (Fb 1001); Lana Grossa quality “Silkhair Lusso” [78% mohair (superkid), 14% silk, 4% polyamide, 4% polyester, LL = about 210 m / 25 g]; about 50 g of turquoise (Fb 909); Knitting needles No. 6.

Lace pattern:
After knitting arb. The number re outside denotes the Hin-R. In the reverse R all M and U str. In width, after the edge st, continue the sts = 16 sts between the arrows, finish with 2 sts after the 3rd arrow. For a better overview 2 MS are drawn. In height, the 1st and 2nd R continued wdh. The edge-M work with knot edge.

Nodules border:
The 1st M every R as Rechtsstr. dep. The last M each R re str.

Knitting tension:
22 M and 24 R in the hole pattern with Nd. No. 6 = 10 x 10 cm

Manual:
Cast on 131 sts with Silkhair Design Fb 1002. 1 row in stocking sts, then in the hole pattern in succession stripe stocking: * 10 R Silkhair Design Fb 1002, 4 R Silkhair Lusso, from * this 14 R still 10x str. = 154 R ** 10 R Silkhair Design Fb 1001, 4 R Silkhair Lusso, from ** this 14 R still 10x str. = 154 R *** 10 R Silkhair Design Fb 1002, 4 R Silkhair Lusso, from this 14 R still 10x str. = 154 r. Loose on M at Silkhair Lusso.

Note for the color change:
Cross the pattern thread between edge-M and 1st basic-pattern M and weave in until it is needed again after 10 or 4 R, respectively.

Working out:
Sew on the threads, then stretch the stole to the above dimensions, moisten and allow to dry.

Summer pullover in raspberry red

Size 36/38 (40/42 – 44/46)
The figures for size 40/42 are in brackets, for size 44/46 after the indent. If there is only one indication, it applies to all three sizes.

Material:
Lana Grossa quality “Solo Lino Mélange” (80% recycled linen (viscose), 20% linen, LL = approx. 105 m / 50 g): approx. 450 (500 – 550) g, marinated red (Fb. 110) ; Knitting needles No. 4 and 5, each 1 circular needles No. 4 and 5, 60 cm long.

Smooth re:
Reverse, reverse R str.

Smooth li:
Back-to-back, back-right st. In Rd only left st.

Hole pattern A:
After knitting A over 5 sts. The numbers on the outside indicate the Hin-R. In the back-R the M and U li str. In the height the 1. – 4. R 1x str., Then this 4 R always wdh.

Hole pattern B:
As hole pattern A, but after knitting B str.

Stressed decreases [sleeves]:
At the R beginning after the 4th M 2 M coated zus.-str. [= 1 st as for right st. dep., which follow. and drag the lifted M over it]. At the R-end before the last 4 sts. Note: If the declines are made directly on the hole pattern R, then at the beginning of R 3 sts instead of 2 sts. For 1 M as Rechtsstr. Dep., which follow. 2 M re zus.-str. and drag the lifted M over it. At the R-end 3 sts instead of 2 sts together.

Knitting tension:
18 M and 21 R smooth with Nd. No. 5 = 10 x 10 cm.

Back:
92 (100 – 108) M with Nd. Cast on No. 4. For the narrow trim, work 1 cm = 2 rows in stocking sts. Then with Nd. No. 5 in succession graduation: 5 M hole pattern A, 82 (90 – 98) M smooth re, 5 M hole pattern B. After 35 cm = 74 R from the iris end beids. mark the beginning of the armholes and continue straight ahead. In 18 (19 – 20) cm = 38 (40 – 42) R armhole height beids. for shoulder straps cast off 3 (4 – 5) sts, then cast off 6 sts 3 times in each 2nd row (3 times 4 sts each time and 3 times 3 sts each – 6 times 4 sts each). In the following row, cast off the remaining 50 sts for the straight neckline edge.

Front:
Like the back part, but with a round neckline. For the same time with the 1st shoulder decrease the mean. 10m abk. and both sides separated weiterstr. At the inner edge for the further rounding in every 2nd row cast 3 times 5 sts each time, 1x 3 sts and 1x 2 sts. After the last shoulder decrease at the outer edge the M of the one side are used up. Finish the other side the same way. Now close the shoulder seams and the sleeves from the top to the bottom in the direction of the arrow.

Sleeve:
With the round. Pick up No. 5 on both sides of the shoulder seam between the markers, each 34 (35 – 37) sts = 68 (70 – 74) sts. Now work 1 back garter st. Then divide into: 5 M hole pattern A, 58 (60 – 64) M smooth re, 5 M hole pattern B. Beids. for the slanting in the 10th row from the beginning of the sleeve, 1 sts on the undershirt, then in every 6th row 10x 1 st on each side. [pay attention to the hole pattern R] = 46 (48 – 52) sts. After 34 cm = 71 R from sleeve start both sides. 1 mark and straight forward. After 13 cm = 28 R from marker for the end panel, 1 cm = 2 rows. Then the M loose li abk. The 2nd sleeve just as anstr.

Working out:
Place part exactly in half, tension, moisten and allow to dry. Rem. Close seams. With the round. Pick up No. 4 from the neckline edge 102 M. For the panel, trim in stockinette st. In 1 cm = 2 Rd panel height, remove the row.

Summer pullover in raspberry red

Size 36/38 (40/42 – 44/46)
The figures for size 40/42 are in brackets, for size 44/46 after the indent. If there is only one indication, it applies to all three sizes.

Material:
Lana Grossa quality “Solo Lino Mélange” (80% recycled linen (viscose), 20% linen, LL = approx. 105 m / 50 g): approx. 450 (500 – 550) g, marinated red (Fb. 110) ; Knitting needles No. 4 and 5, each 1 circular needles No. 4 and 5, 60 cm long.

Smooth re:
Reverse, reverse R str.

Smooth li:
Back-to-back, back-right st. In Rd only left st.

Hole pattern A:
After knitting A over 5 sts. The numbers on the outside indicate the Hin-R. In the back-R the M and U li str. In the height the 1. – 4. R 1x str., Then this 4 R always wdh.

Hole pattern B:
As hole pattern A, but after knitting B str.

Stressed decreases [sleeves]:
At the R beginning after the 4th M 2 M coated zus.-str. [= 1 st as for right st. dep., which follow. and drag the lifted M over it]. At the R-end before the last 4 sts. Note: If the declines are made directly on the hole pattern R, then at the beginning of R 3 sts instead of 2 sts. For 1 M as Rechtsstr. Dep., which follow. 2 M re zus.-str. and drag the lifted M over it. At the R-end 3 sts instead of 2 sts together.

Knitting tension:
18 M and 21 R smooth with Nd. No. 5 = 10 x 10 cm.

Back:
92 (100 – 108) M with Nd. Cast on No. 4. For the narrow trim, work 1 cm = 2 rows in stocking sts. Then with Nd. No. 5 in succession graduation: 5 M hole pattern A, 82 (90 – 98) M smooth re, 5 M hole pattern B. After 35 cm = 74 R from the iris end beids. mark the beginning of the armholes and continue straight ahead. In 18 (19 – 20) cm = 38 (40 – 42) R armhole height beids. for shoulder straps cast off 3 (4 – 5) sts, then cast off 6 sts 3 times in each 2nd row (3 times 4 sts each time and 3 times 3 sts each – 6 times 4 sts each). In the following row, cast off the remaining 50 sts for the straight neckline edge.

Front:
Like the back part, but with a round neckline. For the same time with the 1st shoulder decrease the mean. 10m abk. and both sides separated weiterstr. At the inner edge for the further rounding in every 2nd row cast 3 times 5 sts each time, 1x 3 sts and 1x 2 sts. After the last shoulder decrease at the outer edge the M of the one side are used up. Finish the other side the same way. Now close the shoulder seams and the sleeves from the top to the bottom in the direction of the arrow.

Sleeve:
With the round. Pick up No. 5 on both sides of the shoulder seam between the markers, each 34 (35 – 37) sts = 68 (70 – 74) sts. Now work 1 back garter st. Then divide into: 5 M hole pattern A, 58 (60 – 64) M smooth re, 5 M hole pattern B. Beids. for the slanting in the 10th row from the beginning of the sleeve, 1 sts on the undershirt, then in every 6th row 10x 1 st on each side. [pay attention to the hole pattern R] = 46 (48 – 52) sts. After 34 cm = 71 R from sleeve start both sides. 1 mark and straight forward. After 13 cm = 28 R from marker for the end panel, 1 cm = 2 rows. Then the M loose li abk. The 2nd sleeve just as anstr.

Working out:
Place part exactly in half, tension, moisten and allow to dry. Rem. Close seams. With the round. Pick up No. 4 from the neckline edge 102 M. For the panel, trim in stockinette st. In 1 cm = 2 Rd panel height, remove the row.

Summer pullover in raspberry red

Size 36/38 (40/42 – 44/46)
The figures for size 40/42 are in brackets, for size 44/46 after the indent. If there is only one indication, it applies to all three sizes.

Material:
Lana Grossa quality “Solo Lino Mélange” (80% recycled linen (viscose), 20% linen, LL = approx. 105 m / 50 g): approx. 450 (500 – 550) g, marinated red (Fb. 110) ; Knitting needles No. 4 and 5, each 1 circular needles No. 4 and 5, 60 cm long.

Smooth re:
Reverse, reverse R str.

Smooth li:
Back-to-back, back-right st. In Rd only left st.

Hole pattern A:
After knitting A over 5 sts. The numbers on the outside indicate the Hin-R. In the back-R the M and U li str. In the height the 1. – 4. R 1x str., Then this 4 R always wdh.

Hole pattern B:
As hole pattern A, but after knitting B str.

Stressed decreases [sleeves]:
At the R beginning after the 4th M 2 M coated zus.-str. [= 1 st as for right st. dep., which follow. and drag the lifted M over it]. At the R-end before the last 4 sts. Note: If the declines are made directly on the hole pattern R, then at the beginning of R 3 sts instead of 2 sts. For 1 M as Rechtsstr. Dep., which follow. 2 M re zus.-str. and drag the lifted M over it. At the R-end 3 sts instead of 2 sts together.

Knitting tension:
18 M and 21 R smooth with Nd. No. 5 = 10 x 10 cm.

Back:
92 (100 – 108) M with Nd. Cast on No. 4. For the narrow trim, work 1 cm = 2 rows in stocking sts. Then with Nd. No. 5 in succession graduation: 5 M hole pattern A, 82 (90 – 98) M smooth re, 5 M hole pattern B. After 35 cm = 74 R from the iris end beids. mark the beginning of the armholes and continue straight ahead. In 18 (19 – 20) cm = 38 (40 – 42) R armhole height beids. for shoulder straps cast off 3 (4 – 5) sts, then cast off 6 sts 3 times in each 2nd row (3 times 4 sts each time and 3 times 3 sts each – 6 times 4 sts each). In the following row, cast off the remaining 50 sts for the straight neckline edge.

Front:
Like the back part, but with a round neckline. For the same time with the 1st shoulder decrease the mean. 10m abk. and both sides separated weiterstr. At the inner edge for the further rounding in every 2nd row cast 3 times 5 sts each time, 1x 3 sts and 1x 2 sts. After the last shoulder decrease at the outer edge the M of the one side are used up. Finish the other side the same way. Now close the shoulder seams and the sleeves from the top to the bottom in the direction of the arrow.

Sleeve:
With the round. Pick up No. 5 on both sides of the shoulder seam between the markers, each 34 (35 – 37) sts = 68 (70 – 74) sts. Now work 1 back garter st. Then divide into: 5 M hole pattern A, 58 (60 – 64) M smooth re, 5 M hole pattern B. Beids. for the slanting in the 10th row from the beginning of the sleeve, 1 sts on the undershirt, then in every 6th row 10x 1 st on each side. [pay attention to the hole pattern R] = 46 (48 – 52) sts. After 34 cm = 71 R from sleeve start both sides. 1 mark and straight forward. After 13 cm = 28 R from marker for the end panel, 1 cm = 2 rows. Then the M loose li abk. The 2nd sleeve just as anstr.

Working out:
Place part exactly in half, tension, moisten and allow to dry. Rem. Close seams. With the round. Pick up No. 4 from the neckline edge 102 M. For the panel, trim in stockinette st. In 1 cm = 2 Rd panel height, remove the row.

Sweater

Size 34/36 (38/40)
The figures for sizes 38/40 are in brackets. If there is only one indication, it is valid for both sizes.

Material:
Lana Grossa quality “Nice” (74% cotton, 25% polyester, 1% polyester (metallized), LL = approx. 115 m / 50 g) approx. 350 (400) g Soft blue / Gray / Beige / Silver (Fb 13); Knitting needles No. 4, 1 wool crochet No. 3,5.

Nodules border:
The 1st M every R as Rechtsstr. dep. The last M each R re str. Note: All parts with knot edge work!

Kraus re :
Back and forth row st.

Zackenajourmuster:
After knitting str. The numbers on the outside are the Hin-R, the outside of the back-R. Start in the width with the sts in front of the 1st arrow and continue with sts = 13 sts between the arrows, ending with the sts after the 2nd arrow. In the height the 1.-40. R1xstr., Then this 40 R continues wdh.

Knitting tension:
19 M and 44 R curl with Nd. 4 = 10 x 10 cm; 20 M and 40 R Zackenajourdmuster with Nd. No. 4 knitted = 10 x 10 cm. Note: The arrows in the diagram indicate the direction of knitting! Knit back and front crosswise. The sleeves work from the bottom up.

Back:
Cross in the direction of the arrow str. For 106 M with Nd. Cast on No. 4. First 1 (3) cm) = 4 (14) R garter st. Then in Zackenajourdmuster weiterarb. = 8 MS. After 40 cm = 160 R from the start of the pattern add another 1 (3) cm = 4 (14) R. Then cast off the M loosely.

Front:
As the back part str.

Sleeve:
63 (67) M with Nd. Cast on No. 4. Kraus re str. After 10 cm = 44 R from stop, cast off all sts loose.

Working out:
Stretch parts, moisten and allow to dry. Back and front part in the direction of knitting, lay knitting direction li on top of each other. Then close the shoulder seams for 8 (10) cm each and the side seams each over 36 (35) cm according to the cut pattern. With the crochet. No.3.5 Crochet the neckline edge with 1 round Kettm. Insert sleeves.